RF berdaya tinggiDan Microwave MLCC

dapatkan harga terbaru

Min. Memesan:

Hubungi sekarang

Deskripsi Produk

Atribut Produk

& pengiriman paket

Deskripsi Produk

Atribut Produk

Model No: DLC70P(0603)

& pengiriman paket

The file is encrypted. Please fill in the following information to continue accessing it

Deskripsi Produk

DLC70P(0603) RF dan Microwave MLCC

Fitur Produk:

Nilai Q tinggi, daya tinggi, ESR/ESL rendah, kebisingan rendah, frekuensi resonansi mandiri tinggi, keandalan tinggi.

Aplikasi produk:

Aplikasi fungsional yang umum: penyetelan, bypass, kopling, umpan balik, isolasi DC, dan pencocokan impedansi.

Aplikasi rangkaian umum: Penguat daya RF Uf/microwave, mixer, osilator, penguat kebisingan rendah, jaringan filter, rangkaian waktu, dan rangkaian penundaan.

Tabel kapasitansi DLC7OP

Nomor komponen

Jenis dan ukuran akhir DLC7OP
Satuan: Inci (Milimeter)

Kotak peralatan desain
Dalykapp menawarkan berbagai perangkat desain, dan kapasitor ini memenuhi persyaratan RoHS. Setiap jenis kapasitansi memiliki 10 kapasitor.

Kinerja listrik

ItemS	pecification
Quality Factor (Q value)	≥ 2000, at 1 ± 0.1 MHz, 1 ± 0.2 Vrms.
Insulation Resistance (IR)	≥ 10⁵ MΩ at 25°C, rated voltage applied. ≥ 10⁴ MΩ at 125°C, rated voltage applied.
Dielectric Withstanding Voltage (DWV)	250% of rated voltage applied for 5 seconds.
Operating Temperature Range	-55°C ~ +125°C (Contact Dalicap Technology Co., Ltd. for higher temperature requirements.)
Temperature Coefficient (TC)	0 ± 30 ppm/°C
Capacitance Drift	±0.2% or ±0.05 pF, whichever is greater.
Piezoelectric Effect	None

Pengujian lingkungan

Item	Specification	Method
Resistance to Soldering Heat	Appearance: No mechanical damage. Capacitance change: -1.0% ~ +2.0% or 0.5 pF, whichever is greater. Q factor: > 1000. Insulation resistance: Not less than the initial requirement value.	Preheat at 150°C ~ 180°C for 1 minute, immerse in solder at 260 ± 5°C for 10 ± 1 seconds, and test after cooling for 24 ± 2 hours.
Thermal Shock	Appearance: No mechanical damage. Capacitance change: ≤ 0.5% or 0.5 pF, whichever is greater. Q factor: > 2000. Insulation resistance: ≥ 30% of the initial requirement value. DWV: Meet the initial requirement value.	Test in accordance with MIL-STD-202, Method 107, Condition A. Expose at extreme temperatures for 15 minutes, transition time from minimum to maximum operating temperature ≤ 5 minutes, 5 cycles total.
Moisture Resistance	Appearance: No mechanical damage. Capacitance change: ≤ 0.5% or 0.5 pF, whichever is greater. Q factor: > 300. Insulation resistance: ≥ 30% of the initial requirement value. DWV: Meet the initial requirement value.	Test in accordance with MIL-STD-202, Method 106.
Steady State Humidity Heat	Appearance: No mechanical damage. Capacitance change: ≤ 0.3% or 0.3 pF, whichever is greater. Q factor: > 300. Insulation resistance: Meet the initial requirement value.	Test in accordance with MIL-STD-202, Method 103, Condition A. (Apply 1.5V DC voltage at 85°C, 85% RH for 240 hours.)
Life (Endurance)	Appearance: No mechanical damage. Capacitance change: ≤ 2.0% or 0.5 pF, whichever is greater. Q factor: > 500. Insulation resistance: ≥ 30% of the initial requirement value.	Test in accordance with MIL-STD-202, Method 108. Apply 2× rated voltage at extreme temperature for 2000 hours.